Clean Agent Suppression Calculator
The Clean Agent Suppression Calculator finds the agent mass (kg) needed to flood a hazard to its design concentration. Example: for a 200 m³ hazard protected by FM-200 at 7% design concentration, Agent mass = 118.77 kg, Design concentration = 7 %, Protected volume = 200 m³ (per NFPA 2001:2022).
How it works
Computed from your inputs per NFPA 2001:2022.
Worked example (Fire Protection)
Inputs: a 200 m³ hazard protected by FM-200 at 7% design concentration.
| Result | Value |
|---|---|
| Agent mass | 118.77 kg |
| Design concentration | 7 % |
| Protected volume | 200 m³ |
Computed live by WorkHive's calculation engine; standard: NFPA 2001:2022.
How to use this calculator
- Enter the figures for the duty you are sizing: the worked example below uses a 200 m³ hazard protected by FM-200 at 7% design concentration.
- The calculator returns Agent mass, Design concentration, Protected volume, computed per NFPA 2001:2022.
- Check the worked example to confirm the method matches how you would do it by hand, then run your own numbers in the interactive tool.
FAQ
What is a FM-200 clean agent quantity calculator NFPA 2001?
The Clean Agent Suppression Calculator is a free online tool that computes finds the agent mass (kg) needed to flood a hazard to its design concentration. It shows the formula and a fully worked example so you can check the method, not just the number.
How is it calculated?
The result is computed from your inputs following NFPA 2001:2022. The worked example on this page shows a real computation with real numbers.
Is the calculator free?
Yes. WorkHive's engineering calculators are free to use, no sign-up needed for the tools. WorkHive is a free, offline-first maintenance platform built for Philippine industrial plants.
Run it on your own numbers
Open the interactive Clean Agent Suppression Calculator in WorkHive: free, no sign-up needed for the calculators.